Browse all practice questions for the Arthroplasty IOT Training Practice Test. Search by topic, open any question and review its full explanation, then test yourself in the practice quiz.

Arthroplasty IOT Training Practice Test course image
More practice questions

These questions are part of the practice quiz. Start practicing

  • Which statement best reflects pharmacologic prophylaxis after arthroplasty as described?
  • Metal-on-metal bearings raise concerns about which systemic issue?
  • To prep the humeral canal for the Arthrex Shoulder Fracture System how do you ream?
  • What is the role of tranexamic acid in arthroplasty, and what are common routes of administration?
  • Which material is used for fixation of a cemented hip stem?
  • What is the primary concern with metallosis in metal-on-metal hip implants?
  • What are the primary indications for total hip arthroplasty in osteoarthritis?
  • Describe the clinical relevance of cement viscosity in cemented arthroplasty and its effect on cement interdigitation.
  • The purpose of an SCR is to keep the humeral head centered on the glenoid.
  • What is the typical management for aseptic loosening in hip arthroplasty?
  • Trunnionosis refers to corrosion and wear at which junction, and how is it detected clinically?
  • What is the significance of cement mantle thickness in cemented arthroplasty?
  • True or False: During explanting process, when removing the trunion on the Univers II or Apex stems, it's necessary to remove both the inferior and superior screws to disengage from stem.
  • What is the purpose of a trial reduction in arthroplasty?
  • Which statement best describes the rationale for using a tourniquet in knee arthroplasty and its potential drawbacks?
  • Which sizes of revision stems are available for Univers Revers?
  • What nerve innervates the Deltoid?
  • RTSA stands for which procedure?
  • Which pairing of perioperative risk and preventive strategy is correct for total joint arthroplasty?
  • The humeral head implant for Univers II and glenosphere for Univers Revers are composed of which material?
  • Deltopectoral interval contains which vessel?
  • What is the current recommended arm position in abduction for SCR with a tension-graft?
  • What are the three radiographic hallmarks of Osteoarthritis in an X-ray?
  • Which imaging modalities are used postoperatively to assess hip/knee arthroplasty and which findings indicate complications?
  • Which tool is used to verify that the Morse taper engagement occurred after placing the glenosphere with Univers Revers?
  • Which statement is true regarding the inclination angle and scapular notching?
  • How should modular neck components be evaluated for corrosion and fracture risk in hip arthroplasty?
  • The offset of heads in the Univers II Total Shoulder is?
  • What is the turnaround time to get a SD callibrator?
  • Which is a common indication for revision arthroplasty?
  • Which statement about glenoid tilt and loosening is accurate?
  • What is the standard order for instrument counts in sterile technique?
  • What is the impact of robotic-assisted arthroplasty on component positioning accuracy and revision rates?
  • In the VIP system, which pair of legs overhang the glenoid surface?
  • Which radiographic sign indicates loosening around a hip prosthesis?
  • What is the rationale for tranexamic acid protocols in arthroplasty?
  • Which of the following abduction ranges is within the recommended SCR tension-graft position?
  • How is the 'offset' of a prosthetic hip implant defined and why is it important?
  • What is the difference among cemented, uncemented, and hybrid acetabular components in hip arthroplasty?
  • What is the website for VIP?
  • Which radiographic signs suggest loosening of a hip prosthesis?
  • For hip arthroplasty, how long is pharmacologic DVT prophylaxis commonly continued?
  • Which device has a neck shaft angle range of 135-155 degrees?
  • Which structures are involved in Arthroflex attachment during SCR?
  • What is the most common form of arthritis?
  • Which is a common indication for primary hip arthroplasty?
  • Which step is not part of the trial reduction process?
  • The CA Heads articulate with which two surfaces?
  • Which sterilization methods are typically used for implants versus instruments, and why do they differ?
  • What is the role of antibiotic powder or impregnated cement, and what evidence supports its use in arthroplasty?
  • Which option best describes the typical pharmacologic DVT prophylaxis regimen after hip or knee arthroplasty?
  • During hip arthroplasty trialing, which outcome is primarily assessed to ensure a balanced and stable joint?
  • Which fixation method for hip stems relies on bone ingrowth via a porous surface rather than bone cement?
  • What is the role of antibiotic-impregnated cement in arthroplasty, and what are its limitations?
  • Which pair is involved in Arthroflex attachment in SCR?
  • Radiographic verification of leg length and offset during hip arthroplasty is important because it:
  • Which instrument is used to ensure proper Morse taper engagement of the glenosphere in Univers Revers glenoid?
  • Tranexamic acid dosing strategies in arthroplasty can include which of the following?
  • Which intraoperative strategies are used to restore leg length and offset in total hip arthroplasty?
  • Which statement is true about Eclipse cage screws lengths?
  • How do computer-assisted navigation or robotic guidance affect alignment accuracy in knee arthroplasty?
  • What is the function of a cement restrictor in cemented arthroplasty, and when is it used?
  • In SCR, the Arthroflex graft is anchored to which two structures?
  • Which statement best describes differences in indications and outcomes between hemiarthroplasty and total hip arthroplasty?
  • Stemless shoulder prostheses are favored when there is good metaphyseal fixation because of what benefit?
  • In knee arthroplasty, which design preserves the posterior cruciate ligament?
  • During explanting Univers II or Apex, is it necessary to remove both inferior and superior screws to disengage from the stem?
  • What are typical postoperative rehabilitation milestones after total knee arthroplasty?
  • Which nerve innervates the deltoid?
  • For a periprosthetic fracture, what is the typical management?
  • Ceramic-on-ceramic or ceramic-on-polyethylene bearings have very low wear but carry which risk?
  • Which scenario would most likely disqualify a proximal humerus fracture from percutaneous pinning?
  • Which abduction angle is within the recommended SCR tension-graft position?
  • What best defines leg-length discrepancy in arthroplasty and how is it assessed intraoperatively?
  • What is the neck shaft angle range for Univers II and Apex Cups?
  • What is the initial step in troubleshooting a dislocation after hip arthroplasty in the operating room?
  • Why is irrigation and debridement essential in suspected periprosthetic joint infection, and what does a two-stage revision involve?
  • Which factor most influences early weight-bearing decisions after cemented arthroplasty?
  • Which of the following is a feature of the Univers II and Apex TSA Stems?
  • Patellar tilt and maltracking after total knee arthroplasty are typically corrected by which approach?
  • Why is uniform cement mantle distribution important around a femoral stem?
  • Describe the standard steps of instrument and implant counting before and after arthroplasty surgery and explain why it is critical.
  • Which factor most supports the use of a cementless femoral stem in hip arthroplasty?
  • Which instrument ensures proper Morse taper engagement of the glenosphere?
  • Which pairing correctly describes Arthroflex's attachment in SCR?
  • Can you skip the glenoid peripheral ream?
  • How does patellofemoral joint replacement differ from total knee replacement in indications and technique?
  • In radiographs of a hip prosthesis, which feature suggests loosening?
  • What are the main differences between cruciate-retaining (CR) and posterior-stabilized (PS) knee implants?
  • What is the purpose of preoperative marking and site verification before arthroplasty?
  • What is leg length discrepancy after hip arthroplasty and how can it be minimized intraoperatively?
  • Which of the following factors influences the choice between a stemmed and stemless shoulder prosthesis?
  • Which action contributes to maintaining normothermia during arthroplasty?
  • Within what time frame after surgery is pharmacologic DVT prophylaxis typically started?
  • Are all Univers Revers Glenosphere sizes available in concentric, 3.5 inferior, and +4 offset?
  • What is the maximum spacer tray height in a Univers Revers?
  • Which statement best describes the impact of coronal plane malalignment on knee arthroplasty longevity?
  • Which statement about vaultlock and standard glenoid components is true?
  • Explain why modular neck hip implants may experience corrosion at the head-neck junction and how this risk is mitigated.
  • Which tests are typically included in the initial workup for suspected prosthetic joint infection?
  • The offset for the Posterior Offset option of the suture cup is which value?
  • How does cementless knee fixation rely on bone ingrowth, and what patient factors influence outcomes?
  • What is metallosis in hip arthroplasty and when does it prompt revision?
  • What is the most common form of arthritis?
  • Which statement best differentiates anatomic total shoulder arthroplasty from reverse total shoulder arthroplasty?
  • What is the correct sequence of steps for cementing a femoral stem in a cemented hip arthroplasty?
  • What is the main benefit of robotic-assisted systems in arthroplasty?
  • Which statement most accurately describes the fixation principles for cemented versus cementless femoral stems in hip arthroplasty?
  • In SCR, Arthroflex is attached to which two structures?
  • Patellar resurfacing in TKA involves replacing which component?
  • Univers CA Heads are designed to articulate with what 2 surfaces?
  • In sterile technique, what is the purpose of instrument counts and how are discrepancies managed?
  • Which two anatomical structures are connected by the Arthroflex component used in SCR?
  • Regarding humeral reaming, which statement is correct?
  • Which value represents the maximum torque for inserting central and peripheral screws?
  • What is the typical purpose of an antibiotic spacer in a two-stage revision for infected arthroplasty?
  • Which statement best describes the overall longevity of cemented versus cementless hip stems?
  • Why would a CA Humeral head be indicated instead of a Univers Revers Total Shoulder Arthroplasty?
  • In an infected arthroplasty, one-stage revision is most appropriate under which scenario?
  • On plain radiographs, which finding is most commonly associated with implant loosening?
  • Which of the following best describes the Arthroflex graft's attachment in SCR?
  • Which of the following is a key consideration in glenoid component placement to prevent loosening?
  • Which risk is specifically associated with the anterior approach in hip arthroplasty?
  • What is the most common complication with RTSA resulting in re-operation?
  • Which antibiotic is commonly used for perioperative prophylaxis in arthroplasty, and when is it typically given?
  • Why is intraoperative assessment of hemostasis important during arthroplasty?
  • Which statement correctly describes a limitation of antibiotic-impregnated cement?
  • Which of the following constitutes standard sterile technique measures to prevent implant contamination in the operating room?
  • Which of the following is a typical management approach for early dislocation after hip arthroplasty?
  • Which statement describes the most common complication of RTSA that can lead to re-operation?
  • Which statement best defines Wolff's Law?
  • What is the role of radiographs in the early postoperative assessment of arthroplasty?
  • In hip arthroplasty, when is a constrained liner typically considered?
  • What is wear debris and why is it clinically significant in hip/knee arthroplasty?
  • What is the average anatomic neck-shaft angle of the humerus?
  • Which THA approach is associated with a higher dislocation risk?
  • During a trial reduction, which aspects are assessed before final components are placed?
  • In knee arthroplasty, how is malposition of the tibial or femoral component detected on radiographs and corrected?
  • What is the purpose of the clean/dirty transition in the operating room during arthroplasty?
  • What are common indications for revision arthroplasty in the hip?
  • Which pair of VIP legs overhang the glenoid surface?
  • What is the recommended postoperative wound care approach and signs of superficial infection?
  • Which wear mechanism is driven by hard particles between bearing surfaces?
  • What is a potential disadvantage of a very thick cement mantle?
  • What is the average humeral retroversion reproduced in arthroplasty?
  • When inserting the central and peripheral screws, you must not exceed how many Nm of torque?
  • Which statement best describes the cement mantle in hip arthroplasty, and how its quality is evaluated radiographically?
  • Indications and contraindications for using cementless acetabular cups in the elderly?
  • In knee arthroplasty, what is the typical alignment goal for the postoperative mechanical axis?
  • Which of the following describes trunnionosis and its contributing factors?
  • True or False: The Univers II and Apex stems allow for +/- 10 degrees of version correction.
  • Which two strategies are commonly used to prevent heterotopic ossification after hip arthroplasty?
  • Infection management after hip arthroplasty, what is commonly done?
  • What vascular structure is found at the deltopectoral interval?
  • Which form of arthritis is most common?
  • Which Walch classification indicates posterior erosion with paleo- and neo-glenoid?
  • Megaprosthesis is typically used to replace what?
  • Which patient profile is more likely to receive a cemented hip stem due to reliable immediate stability?
  • What are common risk factors for periprosthetic joint infection?
  • Which factors commonly contribute to dislocation after hip arthroplasty, and how can surgical technique mitigate them?
  • Is it possible to have both 135 and 155 options in a single Univers II stem body?
  • What combination of imaging modalities is used to evaluate preoperative bone stock and canal morphology?
  • Is Arthroflex frozen?
  • Explain the concept of gap balancing versus the measured resection technique in knee arthroplasty.
  • What is the inclination angle of a size 5 Apex Stem?
  • Why is the posterolateral approach in hip surgery associated with higher dislocation risk, and how can risk be mitigated?
  • To minimize leg length discrepancy intraoperatively, which approach is recommended?
  • How is patellar maltracking corrected during total knee arthroplasty?
  • What is the average humeral retroversion reproduced during shoulder arthroplasty?
  • Which statement best describes the steps to maintain a sterile field during arthroplasty?
  • How much press fit does the Univers Revers Stem provide compared with the broach?
  • Which statement correctly identifies the most common form of arthritis?
  • Which statement best reflects the Wolff's Law concept?
  • Describe typical postoperative rehabilitation milestones after a total hip replacement.
  • In an infected arthroplasty, one-stage revision is most appropriate under which scenario?
  • Which statement best describes recommended humeral reaming technique?
  • What is known about ceramic-on-ceramic wear and its most common complication?
  • Which statement best describes sterilization methods for implants versus instruments?
  • Which nerves are at risk during the posterior approach to total hip arthroplasty and how can injuries be mitigated?
  • Postoperative weight-bearing guidelines after cemented hip and knee arthroplasty typically include which statement?
  • Which statement is true when comparing standard glenoid components with Vaultlock?
  • Which statement correctly differentiates primary from revision arthroplasty and identifies a common indication for primary?
  • Which technology is primarily used to verify alignment intraoperatively in modern arthroplasty?
  • In shoulder arthroplasty, what degree is typically used for humeral retroversion?
  • Which item is typically included in preoperative verification for joint replacement?
  • Which Walch classification is posterior erosion of the glenoid cavity that causes definitive paleo-glenoid and neo-glenoid?
  • Which radiographic finding is most compatible with loosening around a hip prosthesis?
  • What size revision stems are available for Univers Revers?
  • Aseptic technique and its critical elements in arthroplasty are best described as which of the following?
  • Which of the following statements about the biomechanics of reverse total shoulder arthroplasty is true?
  • What is the main difference between a megaprosthesis and a standard arthroplasty?
  • Identify a common intraoperative fracture during knee arthroplasty and its typical management.
  • The glenosphere in Univers Revers is made of which material?
  • For knee arthroplasty, typical prophylaxis duration is?
  • In a posterior-stabilized knee design, what is substituted to achieve stability?
  • Which statement best differentiates reverse total shoulder arthroplasty from anatomic total shoulder arthroplasty?
  • What strategy is used to reduce infection risk by addressing perioperative temperatures in arthroplasty?
  • How many cage screw lengths are available with Eclipse?
  • What is the Lewinnek safe zone for acetabular cup positioning and why is it clinically relevant?
  • Which radiographic finding best indicates edge loading in a knee implant?
  • Which of the following is NOT a hallmark of osteoarthritis seen on X-ray?
  • Which abduction range is recommended for SCR when using a tension-graft?
  • Which strategy helps avoid edge loading in knee arthroplasty?
  • Intraoperative soft tissue balancing in total knee arthroplasty is best described by which statement?
  • What is a commonly cited drawback of computer-assisted knee arthroplasty navigation?
  • Which combination best describes the early signs of prosthetic joint infection and the recommended initial workup?
  • Which surfaces are the Univers CA Heads designed to articulate with?
  • Capsuloraphy arthropathy is most commonly treated with which group of surgery?
  • Is it true that vaultlock glenoid has a different radius of curvature than standard glenoid components?
  • In knee arthroplasty, which statement accurately describes cemented versus cementless bearing components?
  • The maximum spacer tray height is achieved with which spacer-poly combination?
  • Which of the following is a reason to select a cementless acetabular component in hip arthroplasty?
  • Which practice helps limit contamination risk in the operating room during joint replacement?
  • The Arthroflex graft in SCR is attached to the Superior Glenoid and which rotator cuff muscle?
  • Which condition is cuff tear arthropathy typically indicated for treatment with reverse total shoulder arthroplasty?
  • The CA Heads are designed to articulate with the glenoid and acromion.
  • The CA Heads are designed to articulate with which two surfaces?
  • What are key infection prevention practices when handling implants in arthroplasty?
  • Which measures are included in the arthroplasty infection prevention bundle?
  • Which bearing surface is most commonly linked to wear debris and osteolysis?
  • Which vascular structure is found at the deltopectoral interval?
  • What is the role of antibiotic-loaded bone cement in joint arthroplasty, and when is it most useful?
  • Insertion site for Subscapularis?
  • In trialing for a total hip replacement, what is the critical step to ensure proper offset and leg length?
  • What material is the Univers Revers Stem made of?
  • Which statement about glenoid bone stock in shoulder arthroplasty is true?
  • What is the purpose of a surgical time-out in the arthroplasty suite, and what should it confirm?
  • During cemented hip arthroplasty, what is a key objective when inserting the femoral stem?
  • Explain the main wear mechanisms (adhesive, abrasive, third-body) in bearing surfaces and strategies to mitigate them.
  • In high-risk hip arthroplasty patients, what is the therapeutic purpose of using a constrained liner?
  • Which is the most common form of arthritis?
  • What is the offset in millimeters for the Posterior Offset option of the suture cup?
  • What are standard postoperative precautions and rehabilitation steps to reduce DVT after arthroplasty?
Subscribe

Get the latest from Passetra

You can unsubscribe at any time. Read our privacy policy